The unit features an automatic electronic shutter with an exposure time ranging from 1/60 to 1/100,000 of a second, as well as a male-to-male BNC (Bayonet Neill-Concelman, RF-type) connecting cable. The VQ1030 runs on 12-volts DC power via an included adapter, and can operate in temperatures from 14 to 122 degrees Fahrenheit. Technical Features: Sensitivity: down to 0. 1 Lux Lens type: 4. 3 mm fixed Resolution: 512 by 492 effective pixels and 380 TVL Operating temperature: 14 to 122 degrees Fahrenheit Dimensions: 1. 5 x 3. 375 x 1. 75 inches (W x D x H) The Lorex VQ1030 weatherproof camera is a great addition to your Lorex surveillance system. Quick and easy to install with a standard BNC to RCA connector, this Lorex camera comes completely assembled and ready to use with a 65-foot cable that lets you install it almost anywhere. Users should note that even with the sunshade the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient. What's in the Box VQ1030 camera, sunshade housing, power/video extension cable (65 feet), power supply, and RCA/BNC connector.

This is merely your tool to get there Colorsplashing? Colorsplash is now the.

1 Lux. The included RCA connector allows this camera to easily connect to any standard TV or VCR, while the RCA-to-six-pin coupler lets you connect to any Lorex Intell-alert observation system. The SG4915 features a built-in electronic automatic shutter with a speed ranging from 1/60 to 1/100,000 of a second. This unit runs on 12-volt DC power, and has an operating temperature of 14 to 122 degrees Fahrenheit. Technical Features: Sensitivity: 0. 1 Lux in B/W Effective pixels: up to 512 x 492 Lens: 3. 6-millimeter fixed Horizontal resolution: 400 TVL Dimensions: 1 inch (diameter) x 2. 125 inches (depth) Operating temperatures: 14 to 122 degrees Fahrenheit Designed for use under trying circumstances, the Lorex SG4915 camera deserves serious consideration as a great addition to any surveillance system subjected to harsh environmental conditions. Quick and easy to install with a standard BNC (Bayonet Neill-Concelman, RF-type) to RCA connector, this Lorex camera comes completely assembled and includes a 65-foot cable that allows you to place it almost anywhere. Users should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient. What's in the Box SG4915 camera, mounting bracket, power adapter, power cable (65 feet), RCA/BNC connector, video extension cable (65 feet), RCA/RCA connector, RCA/6-pin coupler, and owner's manual.