System: AC: Line Lock / Internal (switchable) DC: Internal Resolution:480 TV lines (H), 350 TV lines (V) Minimum Illumination: 0. 6 lx (F 1. 6) AGC (Automatic Gain Control):Built-in (Sens Up Switchable) White Balance: ATW / PUSH (switchable) Backlight Control:Built-in (switchable) Output Signal: BNC terminal, output VBS 1. 0 Vp-p, 75W Ambient Temperature:-10 C - 50 C (14 F - 122 F) Dimensions: 92. 8 (H) x 162 (D) mm (3. 65? x 6. 38?) The Elmo TND4104X Color CCD Dome Camera is a simple, reliable, and highly economical solution for most basic remote monitoring needs. Designed to provide a high resolution in a compact frame, the Elmo TND4104X works very well in low-light conditions and is tamper-resistant, making it perfect for security surveillance or any other situation requiring 24-hour monitoring of an area such as a room, hallway, or production or retail space. This dome camera utilizes a 0. 33-inch color interline-transfer EXview HAD CCD (charge-coupled device) sensor, with 768-by-494 effective pixels. The TND4104X has a high resolution of 480 horizontal TVL (TV lines), is very sensitive to light with a minimum illumination of 0. 6 Lux, and achieves a S/N (signal-to-noise) ratio of 50 dB or better. The Elmo TND4104X is NTSC compatible, and includes a standard CS lens mount and a VBS (video burst sync) composite video-out connector. This unit is can operate on either 24-volts AC or 12-volts DC power, and can operate in temperatures ranging from -10 to 50-degrees Celsius. The TND4104X comes complete with features such as AGC (automatic gain control), backlight control, automatic and manual white balance, and a built-in automatic electronic shutter. Technical Features: S/N ratio: better than 50 dB Sensitivity: minimum illumination of 0. 6 Lux Effective pixels: 768 by 494 pixels Horizontal resolution: 480 TVL Operating temperatures: -10 and 50-degrees Celsius Dimensions: approximately 9 x 16 x 9 centimeters (W x D x H) The Elmo TND4104X camera is a reliable and high-quality addition to any budget and security conscious surveillance system. Designed primarily for indoor use, this unit includes a line-lock/internal sync system. User's should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient. About Dome Cameras A dome camera is one of the most common indoor security camera styles. Mounted on the ceiling, and often designed to be tamper resistant, dome cameras are designed to be visually appealing and more secure than other types of security cameras. A true dome camera enables a continuous 360-degree pan and 90-degree tilt operation, providing for extensive room coverage. One disadvantage of dome cameras is that they usually are not suitable for low-light conditions and must be used in well-lit areas.

The four cameras that comes with the SG14Q5044-A utilize 0. 25-inch color CCD (charge-coupled device) image sensors, and 3. 6mm fixed lenses. Powered from the monitor via the connecting cables, these cameras achieve a horizontal resolution of 350 TVL with 510 by 492 active picture elements. Constructed of durable ABS (Acrylonitrile Butadiene Styrene) plastic, these cameras can receive a usable picture in low-light conditions with a minimum illumination of one Lux. The SG14Q5044-A's cameras come with their own 63-foot connection cables allowing you to install them virtually anywhere, and can operate in temperatures ranging from 14- to 122-degrees Fahrenheit. Technical Features: Camera lenses: 3. 6mm fixed Image sensor: 0. 25-inch color CCD Sensitivity: minimum illumination of 1 Lux Resolution: monitor 380 TVL at 30 frames per second, camera 350 TVL Operating temperature: 14 - 122 degrees Fahrenheit for camera; 32 - 104 degrees Fahrenheit for monitor Monitor dimensions: 14 x 15 x 13 inches (W x D x H) Camera dimensions: 2. 25 x 2. 5 x 3. 33 inches (W x D x H) Designed primarily for indoor use, the Lorex SG14Q5044-A offers you everything you need in a security surveillance system. The SG14C6044A allows up to four cameras to be controlled, viewed, and recorded all by a single unit. User's should note that the CCD image sensor in the camera may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the cameras should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient. What's in the Box Color quad monitor, remote control, 4 x cameras, 4 camera stands, 4 cables (56 feet), and installation hardware.

4 Lux, and achieves a S/N (signal-to-noise) ratio of 50 dB or better. The included T2812WDCPS is a manual-iris variable focal-length industrial lens for CS-mount cameras with an approximately one foot MOD (minimum object distance), and a range of 2. 8 to 12-millimeters with a f1. 4 wide aperture. The Elmo TNC-4604X is NTSC compatible, and includes a standard CS lens mount and a VBS (video burst sync) composite video-out connector. This unit is can operate on either 24-volts AC or 12-volts DC power, and can operate in temperatures ranging from -10 to 50-degrees Celsius. The TNC-4604X comes complete with features such as AGC (automatic gain control), backlight control, automatic and manual white balance, and a built-in automatic electronic shutter. Technical Features: S/N ratio: better than 50 dB Sensitivity: minimum illumination of 0. 4 Lux Effective pixels: 768 by 494 pixels Horizontal resolution: 480 TVL Operating temperatures: -10 and 50-degrees Celsius Dimensions: approximately 6 x 9 x 6 centimeters (W x D x H) The Elmo TNC-4604X camera is a reliable and high-quality addition to any budget-conscious surveillance system. Designed primarily for indoor use, this unit includes a line-lock/internal sync system. User's should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.

Technical Features: Power requirement: 24 vac, 75 VA Camera power outputs: 24-volt AC and 9 to 18-volt DC Blower power output: 12-volt DC Power surge protection: 2-amp 250-volt fuse Operating temperatures: 14- to 120-degrees Fahrenheit Dimensions: approximately 11 x 12 x 11 inches (W x D x H) The Elmo ELB-3610BS Environmental Dome Housing with Blower is a great safeguard to your valuable video surveillance equipment. This dome-housing unit is easy to install, and makes much better economical sense than allowing the damage to your camera that otherwise might occur. Users should note that this Elmo housing unit has mounting plate options and accessories, some of which are specially designed for certain types of Elmo cameras. About Surveillance Camera Housings Most video surveillance systems can be deployed for outside use when a proper camera housing is used. Key features for housings are a blower/fan to keep the camera cool in the summer, and a heater for the cold-weather months and to keep the glass from fogging up. Most housings can accept many types of security cameras. An outdoor dome housing is used for external mounting when tamper resistance or pan/tilt functionality is desired.

The Elmo TNC-4604X is NTSC compatible, and includes a standard CS lens mount and a VBS (video burst sync) composite video-out connector. This unit is can operate on either 24-volts AC or 12-volts DC power, and can operate in temperatures ranging from -10 to 50-degrees Celsius. The TNC-4604X comes complete with features such as AGC (automatic gain control), backlight control, automatic and manual white balance, and a built-in automatic electronic shutter. Technical Features: S/N ratio: better than 50 dB Sensitivity: minimum illumination of 0. 4 Lux Effective pixels: 768 by 494 pixels Horizontal resolution: 480 TVL Operating temperatures: -10 and 50-degrees Celsius Dimensions: approximately 6 x 9 x 6 centimeters (W x D x H) The Elmo TNC-4604X camera is a reliable and high-quality addition to any budget-conscious surveillance system. Designed primarily for indoor use, this unit includes a line-lock/internal sync system. User's should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.

The VL-62 comes complete with automatic gain control and backlight compensation, and a built-in automatic electronic shutter with speeds ranging from 1/60 to 1/100,000 of a second. Technical Features: Minimum illumination: 1 Lux in color to infinity; 0 Lux in B/W via IR LEDs to 30-feet Lens: 4mm board Horizontal resolution: 420 TVL IR LEDs: 10 at 850 NM Dimensions: 2 x 3 inches (diameter x depth) The SPECO VL-62 camera provides you with a high-quality color picture from a camera that can go virtually anywhere, and deserves serious consideration as an addition to any severe-weather or discreet security system. The VL-62 comes completely assembled and ready to use, and includes cable routing through the mount as an added protection against vandalism. Users should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.

Technical Features: S/N ratio: better than 50 dB Sensitivity: minimum illumination of 0. 2 Lux Effective pixels: 768 by 494 pixels Horizontal resolution: 480 TVL Operating temperatures: -10 and 50-degrees Celsius Dimensions: approximately 7. 5 x 16 x 7. 5 centimeters (W x D x H) The Elmo TND4004X camera is a reliable and high-quality addition to any budget and security conscious surveillance system. Designed primarily for indoor use, this unit includes a line-lock/internal sync system. User's should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient. About Dome Cameras A dome camera is one of the most common indoor security camera styles. Mounted on the ceiling, and often designed to be tamper resistant, dome cameras are designed to be visually appealing and more secure than other types of security cameras. A true dome camera enables a continuous 360-degree pan and 90-degree tilt operation, providing for extensive room coverage. One disadvantage of dome cameras is that they usually are not suitable for low-light conditions and must be used in well-lit areas.

5 Lux Effective pixels: 768 by 494 pixels Horizontal resolution: 480 TVL Operating temperatures: -10 and 50-degrees Celsius Dimensions: approximately 7. 5 x 16 x 7. 5 centimeters (W x D x H) The Elmo TND4003X camera is a reliable and high-quality addition to any budget and security conscious surveillance system. Designed primarily for indoor use, this unit includes a line-lock/internal sync system. User's should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient. About Dome Cameras A dome camera is one of the most common indoor security camera styles. Mounted on the ceiling, and often designed to be tamper resistant, dome cameras are designed to be visually appealing and more secure than other types of security cameras. A true dome camera enables a continuous 360-degree pan and 90-degree tilt operation, providing for extensive room coverage. One disadvantage of dome cameras is that they usually are not suitable for low-light conditions and must be used in well-lit areas.