Protection against water ingress goes up to level eight, and a five means this unit will protect your camera against the effects of low-pressure jets of water from any direction. The CAM53CIR comes complete with features such as automatic white balance, and a built-in automatic electronic shutter with speeds ranging from 1/50 to 1/100,000 of a second. Technical Features: S/N ratio: better than 48 dB Sensitivity: 1 Lux standard, 0 Lux up to 50-feet with IR Weatherproof rating: IP55 Horizontal resolution: 470 TVL Operating temperatures: -20 and 50 degrees Celsius Dimensions: 2. 1 inches in diameter and 3 inches in depth The Mace CAM53CIR camera is a reliable and high-quality addition to any surveillance system. This unit uses a standard composite video output, runs on 12-volts of DC power. Users should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.

The web server connects through a RJ45 Ethernet port and supports numerous networking protocols, including TCP/IP, ARP, ICMP, DNS, NTP, HTTP, DHCP, File Transfer Protocol (FTP), Simple Network Management Protocol (SNMP), and Simple Messaging Transport Protocol (SMTP). An RS-232C port provides transparency while a PCMCIA type II slot is available for wireless networking or flash memory storage. Power can be provided through the standard RJ45 Ethernet cable. The Sony SNC-Z20N Fixed Network Color Camera combines a high-resolution, auto focus, low-light sensitivity, and a powerful zoom camera, with a network connection and IP capability, making it ideal for surveillance and remote monitoring applications that require orientation and focus on details. With the addition of its compact design and advanced feature set, the Sony SNC-Z20N is perfect for a wide range of surveillance applications including the monitoring of people and property in buildings, offices, warehouses, retail outlets, and shopping centers. The Sony SNC-Z20N Color Network Camera is a digital network camera that distributes live images or video over an intranet or the Internet via a built-in web-server. The Sony SNC-Z20N allows high-quality remote surveillance from any browser on the network, and provides full Web-based control of its various management and configuration functions. Connecting via 10/100 Base T/TX Ethernet for both networking and power, the SNC-Z20N achieves up to 30 fps (frames per second). This camera utilizes a 0. 25-inch color Exwave HAD CCD (charge-coupled device) image sensor and provides up to 640-by-480 effective pixels at high resolutions. With an extraordinary 18x optical and 12x digital zoom that allows you to clearly pick out even the most distant objects, the Sony SNC-Z20N features a PCMCIA slot for 802. 11b wireless networking or flash memory, good nighttime sensitivity with a minimum illumination of 0. 7 Lux, and a clever E-flip function for correct image presentation in ceiling-mount applications. Technical Features: Sensitivity: minimum illumination of 0. 7 Lux Effective pixels: up to 640 by 480 pixels Zoom: 18x optical and 12x digital Dimensions: 8 x 18. 4 x 7. 7 centimeters (W x D x H) Connection: 10/100 base-T Ethernet The Sony SNC-Z20N surveillance camera is a reliable, economical and high-quality solution for demanding interactive surveillance and is designed primarily for indoor use. User's should note, however, that the CCD sensor in the camera may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. This camera also requires a PC that is not included in this package in order to take advantage of the Internet functionality. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient. About IP Cameras An IP camera can be used to project images and video directly through a computer's Web browser for remote monitoring. An IP camera, unlike a web cam, contains the IP and Web page within it and can often be added to a network without additional configuration or software. Combined with a network video recorder, an IP camera can be used to construct a reliable video surveillance system. About Pan/Tilt Cameras A Pan/Tilt Camera has the ability to pan ("move" horizontally), or tilt ("move" vertically). IP cameras often have pan/tilt capability. A pan/tilt camera is ideal for monitoring of situations that need a continual real-time adjustment of the views. What's in the Box SNC-RZ30N camera AC adapter and code, Ethernet cable, I/O receptacle, ceiling mount kit, ferrite core, CD-ROM (setup program and user's guide), installation manual.

This Camera Station software has a recording database limited only by the hardware it is installed on, and can save all system messages on-screen, in log files, and even via email. This software runs on the Windows XP Pro, 2000, or 2003 Server platforms, or IIS (Internet Information Server) for the Web client, and requires Internet Explorer version 6. 0 or higher. At a minimum this software requires a Pentium-4 two-Gigahertz processor, 512 MB of RAM, and one-Gigabyte of hard disk space for installation as well as two-Gigabytes or more per camera as an image database. To fully experience this software's functionality, you must also have a CD-drive, an XGA monitor with 1024 by 768 or higher pixel resolution, a graphics card with 32 MB or more of memory, a mouse or other compatible pointing device, and a fast Ethernet connection. Technical Features: Operating system: Windows 2000 or higher Required resolution: 1024 by 768 pixels or higher Required RAM: at least 512 MB Minimum processor: Pentium 4, 2GHz or better Space requirements: 1 Gigabyte for installation, plus 2 Gigabytes per camera image storage What you will find is that the Axis Camera Station Software can greatly enhance both the quality and the functionality of your Axis-based surveillance system. The Axis Camera Station works with either networked cameras, or analog cameras with attached video servers, and allows for scalability with the easy addition of licenses for up to 25 cameras. With multiple recording and playback features, camera configuration and control functions, image enhancement capabilities, and event handling features, this camera software is a must-have for any high-level or complex surveillance installation. Note: This Axis software package is designed for medium to large-scale surveillance operations that involve up to 10 cameras.

Made by professional CCTV manufacture. with FREE camera power supply and bracket.