03 Lux - Black & WhiteColor Support: Color, Black & WhiteOptical Zoom: 2. 5xConnectivity Technology: CableWeight: 3 lb.

This unit includes an extraordinary 18x optical and 12x digital zoom that allows you can clearly pick out even the most distant objects, and a S/N (signal-to-noise) ratio of better than 60 dB. The SPECO CVC-927PTZ features a wide dynamic range of operation, and includes eight alarm inputs and four alarm for connecting external devices. Already sensitive to light with a minimum illumination of 0. 7 Lux in color to infinity, this unit automatically switches to black-and-white in night-mode with a minimum illumination 0. 15 Lux in nightmode. If further sensitivity is required, you can remove the IR (infrared) cut filter from the camera, causing the camera to only transmit B/W images and thereby lowering the camera's minimum illumination to 0. 01 Lux. The SPECO CVC-927PTZ has a full pan-angle range of 360 degrees with a tilt range from 0-90 degrees, and includes an auto-flip that rotates your picture 180-degrees at tilt's bottom (for continuous in-motion coverage as something passes beneath the camera). Speeds can range from 0. 1 to 90-degrees per second, with a maximum turbo speed of 360-degrees per second panning. This unit features eight preset tours and allows other tours to be programmed with functions and preset locations, as well as eight auto-scans including vector scan, four patterns and eight privacy zones. The CVC-927PTZ also features an onscreen display of camera ID and area name, and an operating temperature of 32 to 122 degrees Fahrenheit. This camera also includes a built-in RS-485 connection for allowing remote operation from many devices such as controllers or DVRs, and runs on 24-volts of DC power with a built-in power-line surge. Technical Features: Sensitivity: minimum illumination of 0. 7 Lux in color and 0. 15 Lux in B/W, or 0. 01 Lux without IR cut filter Effective pixels: up to 768 by 494 pixels Zoom: 18x optical and 12x digital Pan/Tilt: 360-degrees of panning, 0-90 degree tilt with auto-flip function Dimensions: 5 x 8 inches (diameter x depth) The SPECO CVC-927PTZ surveillance camera is a reliable, economical and high-quality solution for demanding interactive surveillance. The CVC-927PTZ is designed to work with a wide variety of SPECO accessories such as an optional housing with a heater and blower for extremely cold environments, so you can integrate it in to virtually any system. User's should note, however, that the camera's image sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources. This camera also requires a PC that is not included in this package in order to take advantage of the Internet functionality. About Surveillance Camera Technical Features Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient. About Pan/Tilt Cameras A Pan/Tilt Camera has the ability to pan ("move" horizontally), or tilt ("move" vertically). IP cameras often have pan/tilt capability. A pan/tilt camera is ideal for monitoring of situations that need a continual real-time adjustment of the views.

Most housings can accept many types of security cameras. An outdoor dome housing is used for external mounting when tamper resistance or pan/tilt functionality is desired. What's in the Box IWC1-P housing, mounting hardware, and 110-VAC to 24-VAC transformer.

The blower operates on continuous duty, while the heater has a thermostat that activates it at six-degrees Celsius. The ELB-3610HBS allows your camera to operate in temperatures ranging from 14 to 120-degrees Fahrenheit. Technical Features: Power requirement: 24 vac, 100 VA Camera power outputs: 24 vac and 9 to 18 vdc Blower power output: 12 vdc Power surge protection: 2-amp 250-volt fuse Operating temperatures: 14- to 120-degrees Fahrenheit Dimensions: approximately 11 x 12 x 11 inches (W x D x H) The Elmo ELB-3610HBS Environmental Dome Housing with Heater and Blower (Smoked Color) is a great safeguard to your valuable video surveillance equipment. This dome-housing unit is easy to install, and makes much better economical sense than allowing the damage to your camera that otherwise might occur. User should note that this Elmo housing unit has mounting plate options and accessories, some of which are specially designed for certain types of Elmo cameras. About Surveillance Camera Housings Most video surveillance systems can be deployed for outside use when a proper camera housing is used. Key features for housings are a blower/fan to keep the camera cool in the summer, and a heater for the cold-weather months and to keep the glass from fogging up. Most housings can accept many types of security cameras. An outdoor dome housing is used for external mounting when tamper resistance or pan/tilt functionality is desired.